Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.

REF: WAVESLICERGEN2

Rigideck® is the toughest hull building system in the world. If you think of an aeroplane wing or aerospace honeycomb structure you can visualise this super-strong sub-floor framing system, which maximises hull strength and minimises flex. REF: RIGIDECK

The Quickflow® water ballast system delivers excellent stability at rest. Water enters via a cavity at the transom when the boat stops, lowering the chines into the water, and is quickly jettisoned from the hull during acceleration. REF: QUICKFLOWGEN2

The sporty dual console design houses electronics and switches at the helm, while the passenger console incorporates a well-positioned grab rail and cup holders. Good all-round vision and protection for skipper and passenger. REF: BRCONSOLE

The super-strong windscreen frame with safety glass provides good protection for those onboard. The hinged centre section opens to allow convenient walk-through access to the comfortable forward lounge. REF: BRWTWINSCRN

The bow lounge area quickly converts to a functional forward casting platform, with five fully-carpeted and removable boards. Storage for all sorts of gear is available in the cavernous areas under the casting platform.

REF: BRCASTPLAT

The folding rear bench seat and padded coaming provides additional seating for friends and family while the boat is underway, and conveniently folds away when not required to create maximum cockpit fishing space. REF: BRRLOUNGE

Non-slip deck grip pads are installed along the full length of both side decks. Machine cut for accuracy and consistency, the deck grip is applied with high-quality adhesive for permanent installation. It looks good too! REF: DECKGRIP

Side pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.

REF: CPTPKT

Full-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.

REF: BUOYANCY

The step-through transom is very useful when loading or unloading the boat. It provides easy access to and from the cockpit to the marlin board / swim platform. The durable transom door easily slides in/out when required. REF: STEPTHROUGH

A livebait tank is built into the transom. It's an effective design, with a 500gph saltwater pump providing clean water to keep baits alive, and overflow going straight out of the boat. The tinted lid allows filtered light through to keep baits kicking, while the front window allows inspection at a glance. REF: LIVEBAIT

Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.

REF: BAITBOARD

A berley bucket and strong aluminium muncher is mounted in the rear platform / marlin board of every boat. Clear tube also conveniently drains from the baitboard directly into the berley bucket, which helps minimise mess in the boat. REF: BERLEYBUCKETMUNCHER

The heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.

REF: BOARDINGLADDER

Game Lock® coaming incorporates a 45-degree angle on the inner edge, which – along with secure toe-holds around the boat – allows you to lock yourself into comfortable and secure position while fighting fish. REF: GAMELOCK

Lightweight and super strong, cast aluminium rod holders are firmly mounted in the side decks in convenient positions around the boat. Rod butts securely lock into the gimbal fittings, holding tight even in big sea conditions. REF: CASTALLOYRODHOLDERS

Hydraulic steering provides easy, direct and responsive steering, so you are in complete control of the boat at all times – no matter what the size of boat. A sports steering wheel complements the system. REF: HYDRAULICSTEER

The 200L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.

REF: FUELTANK615

The rear fuel filler is part of our SafeTank™ advanced fuel system. The fill-stop valve leaves an expansion space in the top of the tank, allowing for fuel expansion in changing weather. The system also incorporates an in-floor fuel inspection port and all hoses are easily accessible for servicing. REF: FUELFILLER

Essential for separating and draining water from the fuel. Quickly see any water via visual inspection of the easily-accessible clear bowl fuel filter, which is located in the starboard aft corner, tucked away under the gunwale. REF: FUELFILTER

This powerful bilge pump really does the job. Operating at 2000gph, it will very quickly pump out any water that may find itself in the boat, such as from heavy rain or rough seas. Operated from a switch located in the dash at the helm. REF: BILGEPUMP2000GPH

Two quality marine batteries for confident engine starting and running onboard electronics. Housed in weather-resistant battery boxes and secured in the purpose-built battery shelf in the transom, to keep them out of the way. REF: DUALBATT

High-quality LED navigation lights (red – portside; green – starboardside). Super bright and clear, with minimal current draw, and maximum visibility in low-light conditions. Plus, you'll never have to worry about globes failing on the water. REF: LEDNAVLIGHTS

Quality LED anchor light. Super bright output that can be seen from a distance, alerting others boats to your presence while fishing at anchor in low-light conditions and in bad weather. You'll never worry about globes failing on the water either. REF: LEDANCHORLIGHT

High-quality LED strip lights are fitted mid-way along the full-length storage pockets on both port and starboard sides of the boat. These bright LED strips light-up the cockpit deck space at night, as well as the storage pockets. REF: LEDSTRIP

Illuminated and clearly labelled, these quality switches are very useful in low-light conditions and at night for quick and easy identification of the many electrical features of your boat – LED lighting, accessory plug, bilge pump and other items. REF: ILLUMSWITCHES

A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.

REF: 12VOUTLET

Victron Blue Smart IP65 connectors supplied inside the battery boxes. Using the correct Blue Smart charger (sold separately), you can directly charge your batteries without taking them out of their boxes. Ideal if your boat has been in storage for a while. REF: VICTRONBLUE

Designed and manufactured in Australia, the SARCA anchor’s unique design makes it safe and easy to use, and delivers exceptional holding power. Quality steel and galvanising, it's a perfect complement to every Bar Crusher boat. REF: SARCA2

This strong stainless clip is attached to a length of durable bungee cord and secured to a point in the anchor well. It's designed for securing your anchor while the boat is underway or when the anchor is not in use. REF: DECKFIT

Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system. REF: DLAXTRAILER

Working in conjunction with the custom-designed trailer packaged with every Bar Crusher boat, the exclusive Bar Catch® system allows you to always launch and retrieve your boat on your own / single handed. REF: BARCATCH

The spacious lounge in the bow offers comfortable seating for several people. Each full set of cushions includes console backrest cushions and side/front cushions. The trim colour is matched to the selected hull colour.

Sturdy and stylish, the targa rocket launcher can also flip back into the boat for easy storage. Use with or without the optional bimini.

This tough canvas bimini top complements the targa rocket launcher. Removable when not required, it can also accommodate a set of optional clears.

The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.

Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.

This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.

A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.

Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.

The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.

The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.

STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.

A scaled-down version of the premium baitstation with drawers fitted to larger models, the mini deluxe two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.

Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)

FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.

All deep-V hulls can benefit from a set of trim tabs to assist with lateral trim, especially in windy conditions and offshore. These custom-designed alloy trim tabs are operated by electric actuators via a control at the helm.

Mid-range recommended outboard engine for this boat.

Maximum recommended outboard engine for this boat.

Minimum recommended outboard engine for this boat.

STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.

UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.

The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.

Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.

REF: WAVESLICER

REF: BRCASTPLAT

REF: CPTPKT

REF: BUOYANCY

REF: BAITBOARD

REF: BOARDINGLADDER

The 230L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.

REF: FUELTANK670

REF: 12VOUTLET

Sturdy and stylish, the targa rocket launcher can also flip back into the boat for easy storage. Use with or without the optional bimini.

This tough canvas bimini top complements the targa rocket launcher. Removable when not required, it can also accommodate a set of optional clears.

A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.

The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.

The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.

STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.

Mid-range recommended outboard engine for this boat.

Maximum recommended outboard engine for this boat.

Minimum recommended outboard engine for this boat.

The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.

REF: WAVESLICERGEN2

Ergonomically-designed dash capable of flush mounting mid-sized MFDs, digital gauges and other controls. Side-mount throttle control is located to starboard.

REF: DASHC

The folding safety glass windscreen conveniently reduces the boat's overall on-trailer height for easy storage in low garages and carports, as well as creates a more aerodynamic profile when towing on the road.

REF: WINDSCREENFOLD535

The opening forward hatch allows access easy to the bow. The alloy hinged door is big enough for a tall adult to easily get through. Durable rubber clips keep it closed tightly, even in rough conditions out on the water. REF: HATCHDOOR

REF: CPTPKT

REF: BUOYANCY

REF: BAITBOARD

REF: BOARDINGLADDER

The 115L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.

REF: FUELTANK535

Quality marine battery for confident engine starting and running onboard electronics. Housed in a weather-resistant battery box and secured in the purpose-built battery shelf in the transom, to keep it up and out of the way. REF: SINBATT

REF: 12VOUTLET

Two comfortable side-mount bolster seats with easily-accessible tackle storage and 75L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space. REF: SEBOXSIDETACKLEBOLST535

A full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.

REF: SEFB535SET

REF: SNAXTRAILER

Sturdy and stylish, the targa rocket launcher can also flip back into the boat for easy storage. Use with or without the optional bimini.

This tough canvas bimini top complements the targa rocket launcher. Removable when not required, it can also accommodate a set of optional clears.

The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.

Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.

This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.

A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.

The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.

STANDARD
Quality marine battery for confident engine starting and running onboard electronics. Housed in a weather-resistant battery box and secured in the purpose-built battery shelf in the transom.

If you're running an anchor winch or electric motor, you may like to consider upgrading to a dual-battery system in your boat. Complete with a battery isolation switch, the system provides peace of mind if you want more onboard power.

The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.

Mid-range recommended outboard engine for this boat.

Maximum recommended outboard engine for this boat.

Minimum recommended outboard engine for this boat.

UPGRADE
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.

REF: WAVESLICERGEN2

Folding hard top with clears for added weather protection. The folding gas-strut roof and windscreen reduces the boat's on-trailer height by up to a metre for easy storage in standard garages and carports.

REF: ROOFFOLD575

Together with the folding roof, the folding safety glass windscreen conveniently reduces the boat's overall on-trailer height by up to a metre for easy storage in low garages and carports.

REF: WINDSCREENFOLD

Ergonomically-designed dash capable of flush mounting mid-sized MFDs, digital gauges and other controls. Side-mount throttle control is located to starboard.

REF: DASHC

Sturdy rocket launcher designed for the folding hard top. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.

REF: ROCKETL575

REF: CPTPKT

REF: BUOYANCY

REF: BAITBOARD

REF: BOARDINGLADDER

REF: SEBOXSIDETACKLEBOLST

The 160L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.

REF: FUELTANK575

REF: 12VOUTLET

REF: SEFB575SET

REF: SNAXTRAILER

The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.

Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.

This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.

A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.

The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.

The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.