.

 

 

 

 

.

PDF Array Print Array E-mail

quickflow.jpg

Boat design is about trying to incorporate all the very best design features to ensure the hull gives great performance for its intended application. As boat manufacturers and designers we have listened carefully to our customers and ensured that our design technology is applied to provide the smoothest possible ride whilst achieving optimum stability at rest.

Read more...

PDF Array Print Array E-mail

rigideck.jpg

The RigideckTM rigid sub frame and fully welded floor gives the boat a true commercial strength build quality. The subframe consists of six fully welded (Not stitch welded!) stringers which run from stern to bow. The stringers are folded to provide additional strength and surface area for welding. The stringers then have sections of plate welded between to make the whole sub floor into a fully boxed and triangulated frame.

Read more...

PDF Array Print Array E-mail

waveslicer.jpg

The WaveSlicerTM strakeless non pounding hull design has brought about a change in the way many people think. It is one of the very few production boats that has a smooth hull without strakes. The reason for this is that the hull has been designed very carefully to ensure that it has the ideal amount of surface area, chine and V to allow the boat to cut beautifully through chop, hold its course in a following sea and turn hard and flat with out turbulence over the prop.

Read more...

Page 1 of 2

Start
Prev
1
2
Next
End

Contact Info

  • Bar Crusher Boats (Rockbank Aust Pty. Ltd.)
  • 5 Quality Drive Dandenong South (Melbourne) Victoria Australia 3175
  • General Enquiries - Office (03) 9792 2999, Fax (03) 9792 2998
  • Sales Enquiries - Mobile 0408 776 080

Notice

Bar Crusher, Crusher, Crusher Boats, Wavecrusher, For The Ride Of Your Life, Rigideck, Quickflow, Waveslicer are all Trademarks owned and used by Rockbank (Aust) Pty Ltd. © Bar Crusher 2001 - 2011, all rights reserved. All efforts have been made to ensure the accuracy of the information reflected on this site, in some cases recent developments may not be reflected immediately. Please contact us if you wish to verify any such information.

Popup Module

This is the Popup Module feature. Assign any module to the popup module position, and ensure that the Popup Feature is enabled in the iiCMS Administrator.

You can configure its height and width from the iiCMS Administrator.

[readon2 url="index.php?option=com_content&view=article&id=47&Itemid=54"]More Information[/readon2]